Safety pad maintenance

Source：    Release Time：2025-05-18    Pageviews：0

Safety pad maintenance
First, the safety pad initial maintenance: according to the manufacturer's requirements, will be in accordance with rubber floor tiles, artificial clean, warm water washed thoroughly diluted. The type and amount of detergent should be appropriate, because the rubber face soap, copper and other elements, manganese is sensitive, the ground is susceptible to damage.
Second days: clean or handle dry mop, drag oil free; wet with cold water and Dilute Synthetic detergent solution; don't rinse, drop into some places, new glass, if dirt or ground points, you can gently wipe.
Third days: regular spraying of polymeric polishing agent in order to eliminate traces of rubbing it, but if the wax earlier thick, you do not need to spray again.
Black - regular: when floor wax or Poland apparently accumulates dirt into the ground or surface discoloration, it should be surface wax; clean with a protective rubber floor wax as usual.
Two, note: avoid solvents and oils, dust removal mop and alkaline cleaning agent only. Rough steel wool or synthetic pads, ozone and sunlight can cause rubber cracks and aging on the floor, so to avoid doors, open the windows.