Paper and more environmentally friendly foam mats than plast

Source：    Release Time：2025-05-19    Pageviews：0

Paper and more environmentally friendly foam mats than plastic mats

Secure mats when purchasing mats, even for mats also have many questions, such as paper and more environmentally friendly foam pad than plastic mats, there are a lot of consumers? Is the cushion as thick as possible? Geothermal environment mat choose which? Mat also understands the best environment under sourcing
Cushioning microcapsule moisture effect "this mat depends on the environment and conditions of use. "Floor mats are two primary cushioning and moisture proof. Cushioning, water resistance, elasticity and good water resistance of plastic foam pad, especially the surface of poor land roughness, foam pad pad than the better choice. The paper mat on the ground, more stringent requirements, such as the use of self leveling the ground, the ground is not wet paper pad will be better, the more often the moist ground, poor surface smoothness, safer use of foam pad. In considering the environmental performance, simply select the brand manufacturer to produce qualified products, environmental protection should be no problem.
Mat the environmental requirements under the conditions of high use paper pad, the proper use of the foam pad? Two mats have some advantages, if cross relatively flat but more humid, direct paper pad can cause moisture loss paper pad and floor, floor foam, discoloration and noise and other issues. In this case, the following layer of plastic film paper pad can solve the problem. From the pad thermal conductivity, the paper pad is slightly better than the plastic foam pad, but its effect on thermal conductivity is not obvious. If it is geothermal, if the ground is flat and relatively dry (already heating the ground for more than a month), you can choose the paper pad. For new buildings, ground wet and less surface roughness geothermal environments choose foam mats. Pad thickness is 2 mm, choose which kind of? "Thumb rule at 2 mm better pad thickness. If the cushion is too thin, buffer performance is not good, if the ground is too thick, thermal performance, conducive to geothermal heat conduction, but the ground is too thick, because the elasticity is too large, the actor on the floor when the floor is easy to make noise.